Unable To Publish A Powercube - IBM Cognos User Manual

To avoid this problem, set up Great Outdoors Sales.mdl using the following steps:
Procedure
1. Modify the Cs7g.ini to contain [Databases] connections.
2. Open ODBC Data Source Administrator and create a new ODBC data source
3. Connect using a valid user ID and password for SQL Server authentication.
4. Open the model.

Unable to Publish a PowerCube

If you try to publish a PowerCube and the publish action fails, check that the
Windows data source location for the PowerCube is correct.
If the location is not specified correctly, as is the case with the English version of
the sample Sales and Marketing PowerCube, you cannot publish the PowerCube.
Procedure
1. Right-click the PowerCube and click Properties.
2. On the Data Source tab, in the Windows location property, ensure that the
3. To publish the PowerCube, right-click the PowerCube and click Publish
246
IBM Cognos Transformer Version 10.1.1: User Guide
The Cs7g.ini file is located in the installation_location/c10/cs7Gateways/bin
directory.
named great_outdoors_warehouse to connect to the SQL server database,
GOSALESDW, which is provided with the sample installation.
data source location specified for the PowerCube is entered correctly.
For example, the location for the English version of the sample
sales_and_marketing.mdc file should be installation_location\webcontent\
samples\datasources\cubes\PowerCubes\EN
PowerCube as Data Source and Package.
Note that because the sample PowerCubes have already been published, it is
not recommended that you republish them. Republishing a sample PowerCube
may cause the reports that are based on the PowerCube to fail. If you want to
republish a sample PowerCube, republish it using a different name.