Tr0803; Tr0804; Tr0805; Tr0806 - IBM Cognos User Manual

TR0803

More than 1000 date categories have been generated from your specifications. Do
you want to continue generating date categories?
You have asked Cognos Transformer to generate date categories in a time
dimension. After one thousand categories, you are prompted with this warning, to
give you the opportunity to stop category generation and free up system resources
for other types of processing.
Procedure
You can ignore this warning message if your model contains a large number of
date categories; for example, if you have a custom time period with a leaf level
that includes minutes or seconds. However, if you suspect that you have a
runaway process, discontinue category generation and verify that your time
dimension is properly defined by checking the Time tab settings on the
Dimension, Drill Category, and Level property sheets.

TR0804

The earliest date is invalid.
You have specified an invalid Earliest date on the Time tab of the Dimension
property sheet.
Procedure
Verify that the dates you specify are in the valid range: between 19000101 and
99991231 inclusive. Also, the input format for earliest and latest date values must
be YYYYMMDD.

TR0805

The latest date is invalid.
You have specified an invalid Latest date on the Time tab of the Dimension
property sheet.
Procedure
Verify that the dates you specify are in the valid range: between 19000101 and
99991231 inclusive. Also, the input format for earliest and latest date values must
be YYYYMMDD.

TR0806

The date is not valid.
object name and identifier will appear in the title bar at the top of each
property sheet, and also in a tool tip when your pointer hovers over an object.
You can also find object identifiers in the .mdl file. For more information, see
the Cognos Transformer Developer Guide.
Appendix C. IBM Cognos Transformer Error Messages
275