Tr0540; Tr0541; Tr0552 - IBM Cognos User Manual

TR0540

Changing the primary drill-down path from drill_down_pathname will cause any
allocations and partitioning information to be removed from the current primary
drill-down path. Do you want to continue?
Cognos Transformer supports partitioning and measure allocation only in the
primary drill-down path of a dimension. If a dimension has an alternate
drill-down structure, the partitioning and measure allocation cannot be in the
alternate path.
If you specify partitioning or measure allocations within the primary drill-down
path, and you later change the primary drill-down path to an alternate path,
Cognos Transformer erases the existing partitioning and allocation information.
Procedure
To fix your model, you must partition on the levels and categories in the new
primary drill-down path, and also fix the measure allocation used in the new
primary drill-down path.

TR0541

A drill-down category cannot be filtered.
This error occurs when you create a Model Definition Language (MDL) script that
tries to exclude a drill category. The Cognos Transformer Windows interface does
not allow you to exclude a drill category.
Procedure
To avoid this problem, when you reference an object in MDL, make sure you use
the correct object identifier or object name.
You can verify Cognos Transformer object names and identifiers on the Windows
interface. To make them visible, select the Object name and Object identifier
check boxes on the Titles tab of the Preferences property sheet. The object name
and identifier will appear in the title bar at the top of each property sheet, and also
in a tool tip when your pointer hovers over an object.
You can also find object identifiers in the .mdl file. For more information, see the
Cognos Transformer Developer Guide.

TR0552

Manual categories in this dimension cannot be created because the dimension is
locked.
You cannot create categories for a dimension that is locked.
Procedure
To create a manual category for a locked dimension, clear the Prohibit automatic
creation of new categories check box on the General tab of the Dimension
property sheet.
266
IBM Cognos Transformer Version 10.1.1: User Guide