IBM Cognos User Manual page 234

</Settings>
Publishing in Batch-mode
The -f command can be used to publish PowerCubes in batch mode.
Example
The syntax is
cogtr -fspec_file.xml -n2
-ox filename.mdl
where spec_file.xml represents the path and name of the publish specification file,
and where -ox disables the generation of categories and cube creation.
For information about creating a publish specification to publish all cubes in a
model, see "Publishing PowerCubes" on page 162.
The following table describes the parameters specified in the publish specification
file.
220
IBM Cognos Transformer Version 10.1.1: User Guide
<Parameter Name="PackageDescription" Value=""/>
<Parameter Name="PackageToolTip" Value=""/>
<Parameter Name="PackageUpdate" Value="FALSE"/>
<Parameter Name="PackageAllowNullSuppression" Value="TRUE"/>
<Parameter Name="PackageAllowMultiEdgeSuppression"
Value="TRUE"/>
<Parameter Name="PackageAllowAccessToSuppressionOptions"
Value="TRUE"/>
</Parameters>
</Command>
<Command Name="n"/>
<Command Name="d" Value="DataSourceDirectory=C:\Newdata"/>
<Command Name="prompts" Value="MyQuery1">
<Parameters>
<Parameter Name="Prompt1" Value="TestCube"/>
<Parameter Name="Prompt2">
<Values>
<Value>c:\test\cube.mdc</Value>
<Value>c:\test\cube1.mdc</Value>
<Value>c:\test\cube2.mdc</Value>
</Values>
</Parameter>
<Parameter Name="Prompt3" Value="TestPackage"/>
</Parameters>
</Command>
<Command Name="prompts" Value="MyQuery2">
<Parameters>
<Parameter Name="Prompt4">
<Values>
<Value>1</Value>
<Value>4</Value>
<Value>8</Value>
</Values>
</Parameter>
</Parameters>
</Command>
</Commands>
Parameter name
CubeName
Description
The name of the PowerCube in the model.
This is a mandatory value.