Changing Configuration Settings From The Printer Home Page - Intermec PB50 User Manual

Changing Configuration Settings From the Printer Home
Page
PB50 and PB51 Mobile Printer User Guide
If you are have a printer with an 802.11 wireless radio, you can change
configuration settings from the home page of the printer.
To make changes to the configuration
1 Establish a connection between your printer and the network. For
help see "Setting Up 802.11 Radio Communications" on
page 34.
2 Connect your PC to the same network that the printer is on.
3 If you are using Fingerprint or IPL, find the IP address:
a Press the Setup button.
b Press the
c Press to select the Network menu.
d Press until you reach IP address.
e Press to view the IP address.
4 If you are using ESC/P, use a communications program to find the
IP address.
a Start a communications program.
b In the communications program window, type:
ESC{QST:NW}
and press Enter. The IP address of the printer appears in the
communications program window.
5 Start a web browser.
Chapter 2 — Configuring the Mobile Printer
until you reach Network.
45