Usb Interface - Intermec PB50 User Manual

USB Interface

PB50 and PB51 Mobile Printer User Guide
The following illustration shows the PC end of the serial cable.
5 4 3 2 1
9 8 7 6
RS-232 Serial Cable DB9 Pins
Serial Cable Pins and Description (PC End)
Pin Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
To use the USB interface to print from a PC, you need to install the
Intermec InterDriver printer driver on your PC. For help setting up
USB communications, see
USB Interface" on page
The USB cable that ships with the printer has a USB Type A connector
on one end to connect to the PC, and a USB Type B connector on the
other end to connect to the printer. You do not need to configure
communications for the USB port.
Appendix A — Specifications
Description
Data carrier detect
Receive data from host (input)
Transmit data to printer (output)
Data terminal ready
Ground
Data set ready
Request to send from host (input)
Clear to send from printer (output)
Ring indicator
"Connecting the Printer Through the
30.
75