Configuring Wireless Printing Using Ipl - Intermec PB50 User Manual

PB50 and PB51 Mobile Printer User Guide
Understanding the 802.11 Radio Icons (continued)
Icon
Use the following sections to set most of your wireless
communication settings. For help with additional commands and
information, see either the
the IPL Command Reference
documents from the Intermec website at www.intermec.com.

Configuring Wireless Printing Using IPL

Use the following procedures to configure your printer with IPL for
wireless printing.
To configure the printer to use WEP authentication
1 Send the following commands to login as an admin and set the
SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,
where xxxxx can be from 0 to 32 ASCII characters, not including
the double quote.
Note: The default administrator password is "pass." If you have
changed the password, use your password instead of "pass."
2 Send the following commands to configure the WEP keys. The
following example sets WEP key 1 to 1234 and enables WEP key 1.
<STX><SI>ws,WEP1, 0x0001020304<ETX>
<STX><SI>ws,.WEP_KEY,1<ETX>
3 Send the following command to activate the settings:
<STX><SI>ws,ACTIVE,1<ETX>
Chapter 2 — Configuring the Mobile Printer
Description
Weak signal
Poor signal
No signal
Fingerprint Command Reference Manual
Manual. You can download both
xxxxx
<ETX>
or
37