Connecting The Printer To Your Pc; Connecting The Printer Through The Usb Interface - Intermec PB50 User Manual

Chapter 2 — Configuring the Mobile Printer

Connecting the Printer to Your PC

Connecting the Printer Through the USB Interface

30
You can easily connect the printer to your PC using one of these ports:
• USB port
• RS-232 serial interface port
To connect the printer to your PC through the USB port, you need to
install Intermec InterDriver® software. To make sure you have the
latest version of InterDriver, go to the Downloads page for the printer
at http://www.intermec.com/support/downloads/index.aspx.
You also need a separately purchased USB cable (P/N 321-611-xxx).
To connect the printer through the USB port
1 Run the InterDriver installation program.
2 If a Security Warning window appears, click Run. The Intermec
End User License Agreement appears.
3 Read and accept the agreement, and then click Next. The
Installation Directory screen appears.
4 The default installation directory is C:\Intermec\InterDriver7.
Click Next to use the default directory, or specify a different
location to install the files, and then click Next. The Installation
Information screen appears.
5 Clear the Run Add Print Wizard after unpacking drivers check
box and click Finish.
6 On the New Hardware Wizard screen, select Install from a list or
specific location, and then click Next to continue.
Note: For LPT connections, you must restart your computer for
Windows to detect the new hardware. For USB connections, the
New Hardware Wizard starts automatically when the printer is
connected and turned on.
7 On the Search and Installation Options screen, click Next.
8 On the Hardware Installation warning screen, click Continue
Anyway.
PB50 and PB51 Mobile Printer User Guide