Understanding The Printer Modes; Understanding Ready Mode; Understanding Information Mode - Intermec PB50 User Manual

Understanding the Printer Modes

Understanding Ready Mode

Understanding Information Mode

PB50 and PB51 Mobile Printer User Guide
The printer has seven modes: Ready, Information, Pause, Setup, Error,
Dump, and Extended Test. The following sections explain each mode.
The printer is in Ready mode when the printer is on and ready to
print. The main screen shows the power status, the radio status,
printer language, and firmware version number.
To start Ready mode
• If the printer is off or in Standby mode, press the Standby button.
• If the printer is on, press the
SETUP:
IPL 11.2.0
SER-COM
The Printer in Ready Mode
When the printer is in Information mode, it shows a subset of
network information about the printer. If there is an error, the error
message appears first, followed by the printer information. Each
message appears for five seconds.
Note: You must use IPL or Fingerprint to start Information mode.
Chapter 1 — Using the Mobile Printer
soft key.
21