Changing Configuration Settings From The Printer Home Page; Changing Configuration Settings Using Smartsystems Foundation - Intermec PB21 User Manual

Chapter 2 — Configuring the PB21/PB31
26
If your printer uses the Fingerprint language, you use the SETUP
command, followed by the node, subnode, and parameters setting.
Fingerprint automatically sends feedback to HyperTerminal as you
type.
If you want to see what you are typing with IPL, you need to complete
the following procedure.
To see IPL commands as you type
1 From the HyperTerminal menu, select File > Properties > the
Settings tab.
2 Click the ASCII Setup button.
3 Select Echo typed characters locally.
4 Click OK twice.
Changing Configuration Settings From the Printer
Home Page
If you have an 802.11 radio in your printer and it is connected to the
network, you can use your web browser to open the printer home page
and make configuration changes. To connect to a wireless network,
follow the procedure in
Communications" on page
To make changes to the configuration
• From the home page, click Configuration.
For more information on how to change configuration settings, see
the Fingerprint Command Reference
Command Reference
Manual. You can download these documents from the Intermec web
site at www.intermec.com.
Changing Configuration Settings Using SmartSystems
Foundation
You can use the SmartSystems console to change configuration
settings on your printer. The PB21/PB31 ships with the
SmartSystems client loaded on it. The console is part of
SmartSystems Foundation and is available from the Intermec web
site. To download SmartSystems Foundation, go to
www.intermec.com/products/smrtsysfoundation/index.aspx.
"Setting Up 802.11 Radio
30.
Manual, the
Manual, or the
ESC/P Programmer's Reference
PB21/PB31 Mobile Receipt Printer User's Guide
IPL Programmer's