Upgrading Printer Firmware Using Smartsystems Foundation; Upgrading The Printer Firmware Using A Communications Program - Intermec PB50 User Manual

Upgrading Printer Firmware Using SmartSystems
Foundation
Upgrading the Printer Firmware Using a Communications
Program
PB50 and PB51 Mobile Printer User Guide
8 When prompted, type your user name and password. The default
user name is "admin" and the default password is "pass."
9 Browse to the (.bin) file you want to upgrade to and select it.
10 Click Upgrade.
Wait approximately five minutes for the firmware upgrade to
complete. The printer automatically restarts.
You can use the SmartSystems console to upgrade the printer
firmware. Your printer ships with the SmartSystems client preloaded.
The console is part of SmartSystems Foundation, and is available
from the Intermec website. To download SmartSystems Foundation,
go to www.intermec.com/products/smrtsysfoundation/
index.aspx.
You can upgrade your printer firmware using a communications
program, such as HyperTerminal, and a printer running either the
IPL, Fingerprint, or ESC/P printer language.
Note: Intermec recommends that you upgrade your printer firmware
using PrintSet or the home page of the printer.
To upgrade the printer firmware using a communications program
and IPL
1 Connect your printer to your PC using a serial cable. For help, see
"Connecting the Printer Through the Serial Port" on page
Or, establish a connection between your printer and your network.
For help, see "Connecting the Printer to Your Network" on
page 32.
2 If you connected your printer to the network, establish a
connection between your PC and the network.
Chapter 2 — Configuring the Mobile Printer
31.
51