Understanding Error Mode; Understanding Dump Mode - Intermec PB50 User Manual

Chapter 1 — Using the Mobile Printer

Understanding Error Mode

Understanding Dump Mode

24
+
IP ADDRESS:
130.42.240.102
Enhanced Editing Mode: In enhanced editing mode, you see a plus sign (+) and
a right arrow to change the value of numeric settings.
The printer starts Error mode when it detects an error condition, such
as a low battery or a paper jam. Some error messages appear on the
screen immediately when they occur, such as DOOR OPEN. Other
error messages do not appear until you press the Info button. If there
is more than one error, the errors appear in the order that they
occurred.
PAPER FAULT
Sample Error Mode Screen
If an error message appears, see
on page 58 for more information on how to fix the problem.
Dump mode can be used to identify simple problems, such as label
alignment. Extended Test mode requires more user interaction and
lets you choose which tests you want the printer to perform.
To start and stop Dump mode
1 Make sure the printer is in Ready mode and is loaded with media.
2 Press and hold the Feed and Standby buttons for about five
seconds, or until the SELECT MEDIA message appears on the
screen.
"Understanding Error Messages"
PB50 and PB51 Mobile Printer User Guide