Printing A Test Page - Intermec PB50 User Manual

Chapter 1 — Using the Mobile Printer

Printing a Test Page

26
Options in Extended Test Mode
Function
Select Media
Test Labels
Dump Mode
Factory Default
Setup and Exit
Exit
After you have loaded media in the printer, you are ready to print a
test page, or testprint. Each printer language has several different
testprint options. If you cannot get the information to print, see
"Troubleshooting the Mobile Printer" on page
To print a test page with a printer loaded with IPL
1 Press the Setup button.
2 Press until Test/Service appears on the screen.
3 Press to select the Test/Service menu.
4 Press to select the Testprint Config menu.
5 Press to select the Config menu.
6 Press to choose a test page.
7 Press to print the selected test page.
Description
This option is almost the same as the
process in Dump mode, except that the
printer performs a slow testfeed in
Extended Test mode. The slow testfeed can
help resolve gap or mark detection
problems.
This option allows you to print test labels
one at a time. Press
label.
This option starts Dump mode. For more
information on Dump mode, see
"Troubleshooting Communication
Problems" on page
This option restores the factory default
settings. Press to select this option,
then follow the instructions on the screen.
This option stops Extended Test mode and
puts the printer in Setup mode.
This option stops Extended Test mode.
PB50 and PB51 Mobile Printer User Guide
to print the next
62.
58.