Activating/Disabling A General Alarm - Siemens HiPath 1100 User Manual

Step by step
*9414=RLA CHK
qmheh
or
Enter the code for checking the status of the relay.

Activating/Disabling a general alarm

If the support technician configured the alarm feature
for your extension, it will ring whenever there is an
alarm condition on the HiPath 1100.
Answer the call to acknowledge that the alarm was de-
tected. If the alarm call is not acknowledged, a new at-
tempt at a call will be made (as programmed) and the
extension will ring again.
Required: The display shows "CALL: RLA CHK..."and
your telephone will ring three times (three short beeps)
at 4-second intervals.
n
or Lift the handset or press the SPEAKER key.
t
or Replace the handset or press the SPEAKER key
Miscellaneous functions
89