Connections; Cpuid - D-Link DFL-260E Manual

2.2.12. cpuid

2.2.11. connections

List current state-tracked connections.
Description
List current state-tracked connections.
Usage
connections -show [-num=<n>] [-verbose] [-srciface=<interface>]
List connections.
connections
Same as "connections -show".
connections -close [-all] [-srciface=<interface>]
Close connections.
Options
-all
-close
-destiface=<interface>
-destip=<ip addr>
-destport=<port>
-num=<n>
-protocol=<name/num>
-show
-srciface=<interface>
-srcip=<ip addr>
-srcport=<port>
-verbose
2.2.12. cpuid
[-destiface=<interface>] [-protocol=<name/num>]
[-srcport=<port>] [-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>]
[-destiface=<interface>] [-protocol=<name/num>]
[-srcport=<port>] [-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>]
Mark all connections.
Close all connections that match the filter expres-
sion. (Admin only)
Filter on destination interface.
Filter on destination IP address.
Show only given destination TCP/UDP port.
Limit list to <n> connections. (Default: 20)
Show only given IP protocol.
Show connections.
Filter on source interface.
Filter on source IP address.
Show only given source TCP/UDP port.
Verbose (more information).
36
Chapter 2. Command Reference