Dhcprelay - D-Link DFL-260E Manual

3.13. DHCPRelay

3.13. DHCPRelay
Description
Use a DHCP Relay to dynamically alter the routing table according to relayed DHCP leases.
Properties
Name
Action
SourceInterface
TargetDHCPServer
IPOfferFilter
AddRoute
AddRouteLocalIP
AddRouteGatewayIP
RoutingTable
MaxRelaysPerInterface
AgentIP
AllowNULLOffers
ProxyARPAllInterfaces
ProxyARPInterfaces
LogEnabled
LogSeverity
Comments
Chapter 3. Configuration Reference
Specifies a symbolic name for the relay rule.
(Identifier)
Ignore, Relay or BootpFwd. (Default: Ignore)
The source interface of the DHCP packet.
Specifies the IP of the server to send the relayed
DHCP packets to.
Specifies the span of IP addresses that are allowed to
be relayed from the DHCP server. (Default: 1)
Enable dynamic adding of routes as leases are added
and removed. (Default: No)
The IP Address specified here will automatically be
published on the interfaces where a route is added.
(Optional)
The IP used as gateway to reach hosts on this route.
(Optional)
Specifies the routing table the clients host route
should be added to. (Default: main)
Specifies how many relays are allowed per interface,
that means, how many DHCP clients are allowed to
be relayed through each interface. (Optional)
Define what IP the relay should use as gateway IP
when passing the requests to the DHCP server.
(Default: Recv)
Accept server responses offering IP address
"0.0.0.0" (no IP address offered). (Default: No)
Always select all interfaces, including new ones, for
publishing routes needed for the relay via Proxy
ARP. (Default: No)
Specifies the interface/interfaces on which the secur-
ity gateway should publish routes needed for the re-
lay via Proxy ARP. (Optional)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Text describing the current object. (Optional)
102