Start A 30 Min Burn-In Duration Test, Testing Ram, Storage Media And Crypto The Acceler- Ator - D-Link DFL-260E Manual

2.2.46. selftest
selftest -ping -interfaces=if1,if2
Example 2.14. Start a 30 min burn-in duration test, testing RAM, storage media and
crypto the accelerator
selftest -burnin -minutes 30 -media -memory -cryptoaccel
Usage
selftest -memory [-num=<Integer>]
Check the sanity of the RAM.
selftest -media [-size=<Integer>]
Check the sanity of the disk drive.
selftest -mac
Check if there are MAC address collisions on the interfaces.
selftest -ping [-interfaces=<Interface>]
Run a ping test over the interfaces.
selftest -throughput [-interfaces=<Interface>]
Run a throughput test over the interfaces.
selftest -traffic [-interfaces=<Interface>]
Run a traffic test over the interfaces.
selftest -cryptoaccel
Verify the correct functioning of the accelerator cards.
selftest -burnin [-hours[=<Integer>]] [-minutes[=<Integer>]]
Run burn-in tests for a set of sub tests. If no sub tests are specified the following are included: -
memory, -ping, -traffic, -cryptoaccel.
selftest -abort
Abort a running self test.
selftest
Show the status of a running test.
[-memory] [-media] [-ping] [-throughput] [-traffic]
[-cryptoaccel]
58
Chapter 2. Command Reference