Piperule - D-Link DFL-260E Manual

3.40. PipeRule

3.40. PipeRule
Description
A Pipe Rule determines traffic shaping policy - which Pipes to use - for one or more types of traffic
with the same granularity as the standard ruleset.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
ForwardChain
ReturnChain
Precedence
FixedPrecedence
Comments
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the object. (Optional)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the sender span of IP addresses to be com-
pared to the received packet.
Specifies the the destination interface to be com-
pared to the received packet.
Specifies the span of IP addresses to be compared to
the destination IP of the received packet.
Specifies a service that will be used as a filter para-
meter when matching traffic with this rule.
By adding a schedule to a rule, the security gateway
will only allow that rule to trigger at those desig-
nated times. (Optional)
Specifies one or more pipes to be used for forward
traffic. (Optional)
Specifies one or more pipes to be used for return
traffic. (Optional)
Specifies what precedence should be assigned to the
packets before sent into a pipe. (Default: FromPipe)
Specifies the fixed precedence.
Text describing the current object. (Optional)
151