Ipsettings - D-Link DFL-260E Manual

3.52.10. IPSettings

IPsecHardwareAcceleration
IPsecDisablePKAccel
3.52.10. IPSettings
Description
Settings related to the IP protocol.
Properties
EnableIPv6
LogReceivedHopLimit0
HopLimitMin
HopLimitOnLow
HopLimitMinMulticast
HopLimitOnLowMulticast
DefaultHopLimit
IP6Fl
IP6TC
IP6MaxExtHdr
IP6OnMaxExtHdr
IP6MaxOptHdr
IP6OnMaxOptHdr
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
aliveness sign before activating IKE DPD. (Default:
No)
IPsec hardware acceleration. (Default: Inline)
Disable hardware acceleration for public-key opera-
tions. (Default: No)
Enable processing of IPv6 traffic. (Default: No)
Log received packets with Hop-Limit=0; this should
never happen! (Default: Yes)
The minimum IP Hop-Limit value accepted on re-
ceipt. (Default: 3)
What action to take on too low unicast Hop-Limit
values. (Default: DropLog)
The minimum IP multicast Hop-Limit value accep-
ted on receipt. (Default: 3)
What action to take on too low multicast Hop-Limit
values. (Default: DropLog)
The default IP Hop-Limit of packets originated by
the security gateway (32-255). (Default: 255)
Validate IPV6 Flow label header field. (Default: Ig-
nore)
Validate IPV6 Traffic class header field. (Default:
Ignore)
Maximum allowed size of all IP6 extension headers.
(Default: 256)
Validate the extension header length when it goes
beyond IP6MaxExtHdr. (Default: DropLog)
Total number of options allowed per IP6 extension
header. (Default: 8)
Validate the number of options per extension header
when it goes beyond IP6MaxOptHdr. (Default:
178