Leds & Physical Connections - D-Link DFL-1100 Manual

LEDs & Physical Connections
WAN, LAN, DMZ & ETH4/Sync: Ethernet Link port indicators, Green. The Act LED
flickers when the ports are sending or receiving data.
Power: A solid light indicates a proper connection to the power supply.
Status: System status indicators, flashes to indicate an active system. If the LED has a
solid light the unit is defective.
Console: Serial access to the firewall software, 9600, 8bit, None Parity, 1Stop bit.
External Port (WAN): Use this port to connect to the external router, DSL modem, or
Cable modem.
Internal Ports (LAN): Use this port to connect to the internal network of the office.
DMZ Port: Use this port to connect to the company's server(s), which needs direct
connection to the Internet (FTP, SNMP, HTTP and DNS).
ETH4/Sync Port: Use this port to as an extra LAN or DMZ port, or when using High
Availability as Sync interface.
8