Connections Status - D-Link NetDefend SOHO DFL-160 User Manual

6.6. Connections Status

6.6. Connections Status
A connection in NetDefendOS refers to either a normal TCP/IP connection set up to perform a
transfer of data or a UDP packet based "connection", where a stream of packets is being sent from a
sender to a receiver (such as in a streaming video transfer).
This page of the web interface shows the currently established connections. The list shows the
protocol (TCP or UDP), the source IP address and the destination IP address of the connection. A
example of the information displayed is shown below.
Where the source of destination address is marked as core this means that it is NetDefendOS itself
that is dealing with the connection.
The ability to filter the connections is possible based on specific combinations of source/destination
IP address/interface.
86
Chapter 6. The Status Menu