Remotemgmtsettings - D-Link DFL-260E Manual

3.52.17. RemoteMgmtSettings

3.52.17. RemoteMgmtSettings
Description
Setup and configure methods and permissions for remote management of this system.
Properties
NetconBiDirTimeout
WebUIBeforeRules
WWWSrv_HTTPPort
WWWSrv_HTTPSPort
WebUIAllowLoginAutoComplete
SSHBeforeRules
HTTPSCertificate
SNMPBeforeRules
SNMPRequestLimit
SNMPSysContact
SNMPSysName
SNMPSysLocation
SNMPIfDescription
SNMPIfAlias
LocalConsoleIdleTimeout
WebUIIdleTimeout
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
Specifies the amount of seconds to wait for the ad-
ministrator to log in before reverting to the previous
configuration. (Default: 30)
Enable HTTP(S) traffic to the security gateway re-
gardless of configured IP Rules. (Default: Yes)
Specifies the HTTP port for the web user interface.
(Default: 80)
Specifies the HTTPS port for the web user interface.
(Default: 443)
Allow the web browser to remember the username
and password on the login page. (Default: Yes)
Enable SSH traffic to the security gateway regard-
less of configured IP Rules. (Default: Yes)
Specifies which certificate to use for HTTPS traffic.
Only RSA certificates are supported. (Optional)
Enable SNMP traffic to the security gateway regard-
less of configured IP Rules. (Default: Yes)
Maximum number of SNMP packets that will be
processed each second. (Default: 100)
The contact person for this managed node. (Default:
N/A)
The name for this managed node. (Default: N/A)
The physical location of this node. (Default: N/A)
What to display in the SNMP MIB-II ifDescr vari-
ables. (Default: Name)
What to display in the SNMP ifMIB ifAlias vari-
ables. (Default: Hardware)
Number of seconds of inactivity until the local con-
sole user is automatically logged out. (Default: 900)
Number of seconds of inactivity until the HTTP(S)
session is closed. (Default: 900)
184