Igmprule - D-Link DFL-260E Manual

3.25. IGMPRule

3.25. IGMPRule
Description
An IGMP rule specifies how to handle inbound IGMP reports and outbound IGMP queries.
Properties
Index
Name
Type
Action
SourceInterface
SourceNetwork
DestinationInterface
MulticastGroup
MulticastSource
RelayInterface
TranslateMGroup
GrpAllToOne
NewGrpIP
TranslateMSource
SrcAllToOne
NewSrcIP
Filter
LogEnabled
LogSeverity
Comments
Chapter 3. Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
The type of IGMP messages the rule applies to.
(Default: Report)
Drop, Snoop, Proxy or PIM. (Default: Drop)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the sender span of IP addresses to be com-
pared to the received packet.
Specifies the the destination interface to be com-
pared to the received packet. (Default: core)
Specifies the multicast group to be compared to the
received packet.
Specifies the multicast source to be compared to the
received packet.
Specifies the interface via which to relay IGMP mes-
sages.
Translate the multicast group for packets matching
this rule. (Default: No)
Rewrite all multicast groups to a single IP. (Default:
No)
Translate the multicast group to this address.
Translate the multicast source for packets matching
this rule. (Default: No)
Rewrite all multicast sources to a single IP. (Default:
No)
Translate the multicast source to this address.
Pass IGMP data not matching this rule to the next
rule. (Default: Yes)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Text describing the current object. (Optional)
119