Statesettings; Tcpsettings - D-Link DFL-260E Manual

3.52.21. StateSettings

Properties
SSLVPNBeforeRules
3.52.21. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
LogOpenFails
LogReverseOpens
LogStateViolations
LogConnections
LogConnectionUsage
MaxConnections_Dynamic
MaxConnections

3.52.22. TCPSettings

Description
Settings related to the TCP protocol.
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
Pass SSL VPN connections sent to the security gate-
way directly to the SSL VPN engine without con-
sulting the ruleset. (Default: Yes)
What to do when the connection table is full.
(Default: ReplaceLog)
Log packets that are neither part of open connections
nor valid new connections. (Default: Yes)
Log reverse connection attempts through an estab-
lished connection. (Default: Yes)
Log packets that violate stateful tracking rules; for
instance, TCP connect sequences. (Default: Yes)
Log connections opening and closing. (Default: Log)
Log for every packet that passes through a connec-
tion. (Default: No)
Allocate the Max Connection value dynamically.
(Default: Yes)
Maximum number of simultaneous connections.
(Default: 8192)
187