L2Tpclient - D-Link DFL-260E Manual

3.28.6. L2TPClient

OriginatorIP
OriginatorHAIP
DHGroup
PFS
PFSDHGroup
SetupSAPer
KeepAlive
KeepAliveSourceIP
KeepAliveDestinationIP
Metric
AutoInterfaceNetworkRoute
Comments
3.28.6. L2TPClient
Description
A PPTP/L2TP client interface is a PPP (Point-to-Point Protocol) tunnel over an existing IP network.
Its IP address and DNS servers are dynamically assigned.
Properties
Name
IP
Network
RemoteEndpoint
Chapter 3. Configuration Reference
NAT. (Default: LocalInterface)
Manually specified originator IP address to use as
source IP in e.g. NAT.
Manually specified private originator IP address for
use in HA. (Optional)
Specifies the Diffie-Hellman group to use when do-
ing key exchanges in IKE. (Default: 2)
Specifies whether PFS should be used or not.
(Default: None)
Specifies which Diffie-Hellman group to use with
PFS. (Default: 2)
Setup security association per network, host or port.
(Default: Net)
Disabled, Auto or Manual. (Default: Disabled)
Source IP address used when sending keep-alive
ICMP pings.
Destination IP address used when sending keep-alive
ICMP pings.
Specifies the metric for the auto-created route.
(Default: 90)
Automatically add a route for this interface using the
given remote network. (Default: Yes)
Text describing the current object. (Optional)
Specifies a symbolic name for the interface.
(Identifier)
The host name to store the assigned IP address in, if
this network object exists and have a value other
then 0.0.0.0 the PPTP/L2TP client will try to get that
one from the PPTP/L2TP server as preferred IP.
(Optional)
The network from which traffic should be routed in-
to the tunnel.
The IP address of the L2TP/PPTP server.
127