Serviceicmpv6 - D-Link DFL-260E Manual

3.51.3. ServiceICMPv6

ParameterProblemCodes
EchoReply
EchoReplyCodes
SourceQuenching
SourceQuenchingCodes
TimeExceeded
TimeExceededCodes
PassICMPReturn
ALG
MaxSessions
Comments
3.51.3. ServiceICMPv6
Description
An IPv6-ICMP Service is an object definition representing IPv6-ICMP traffic with specific paramet-
ers.
Properties
Name
MessageTypes
EchoRequest
EchoRequestCodes
EchoReply
EchoReplyCodes
Chapter 3. Configuration Reference
Specifies which Parameter Problem message codes
should be matched. (Default: 0-255)
Enable matching of Echo Reply messages. (Default:
No)
Specifies which Echo Reply message codes should
be matched. (Default: 0-255)
Enable matching of Source Quenching messages.
(Default: No)
Specifies which Source Quenching message codes
should be matched. (Default: 0-255)
Enable matching of Time Exceeded messages.
(Default: No)
Specifies which Time Exceeded message codes
should be matched. (Default: 0-255)
Enable passing an ICMP error message only if it is
related to an existing connection using this service.
(Default: No)
An Application Layer Gateway (ALG), capable of
managing advanced protocols, can be specified for
this service. (Optional)
Specifies how many concurrent sessions that are per-
mitted using this service. (Default: 200)
Text describing the current object. (Optional)
Specifies a symbolic name for the service.
(Identifier)
Specifies the IPv6-ICMP message types that are ap-
plicable to this service. (Default: All)
Enable matching of Echo Request messages.
(Default: No)
Specifies which Echo Request message codes should
be matched. (Default: 0-255)
Enable matching of Echo Reply messages. (Default:
No)
Specifies which Echo Reply message codes should
168