Iprule - D-Link DFL-260E Manual

3.30. IPRule

3.30. IPRule
Description
An IP rule specifies what action to perform on network traffic that matches the specified filter criter-
ia.
Properties
Index
Name
Action
SourceInterface
DestinationInterface
SourceNetwork
DestinationNetwork
Service
Schedule
NATAction
NATSenderAddress
NATPool
SATTranslate
SATTranslateToIP
SATTranslateToPort
SATAllToOne
RequireIGMP
MultiplexArgument
MultiplexAllToOne
Chapter 3. Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
Reject, Drop, FwdFast, Allow, NAT or SAT.
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the the destination interface to be com-
pared to the received packet.
Specifies the sender span of IP addresses to be com-
pared to the received packet.
Specifies the span of IP addresses to be compared to
the destination IP of the received packet.
Specifies a service that will be used as a filter para-
meter when matching traffic with this rule.
By adding a schedule to a rule, the security gateway
will only allow that rule to trigger at those desig-
nated times. (Optional)
Specify sender address or Use interface address.
(Default: UseInterfaceAddress)
Specifies which sender address will be used.
Specifies which sender address will be used.
Specifies whether to translate source IP or destina-
tion IP. (Default: DestinationIP)
Translate to this IP address.
Translate to this port. (Optional)
Rewrite all destination IPs to a single IP. (Default:
No)
Multicast traffic must have been requested using IG-
MP before it is forwarded. (Default: Yes)
Specifies how the traffic should be forwarded and
translated.
Rewrite all destination IPs to a single IP. (Default:
No)
135