Interfacegroup; Ipsectunnel - D-Link DFL-260E Manual

3.28.4. InterfaceGroup

OriginatorIP
Metric
AutoInterfaceNetworkRoute
UseSessionKey
SessionKey
Comments
3.28.4. InterfaceGroup
Description
Use an interface group to combine several interfaces for a simplified security policy.
Properties
Name
Equivalent
Members
Comments

3.28.5. IPsecTunnel

Description
An IPsec tunnel item is used to define IPsec endpoint and will appear as a logical interface in the
system.
Properties
Index
Name
Chapter 3. Configuration Reference
NAT. (Default: LocalInterface)
Manually specified originator IP address to use as
source IP in e.g. NAT.
Specifies the metric for the auto-created route.
(Default: 90)
Automatically add a route for this interface using the
given remote network. (Default: Yes)
Specify whether or not to use a session key.
(Default: No)
Session key. (Default: 0)
Text describing the current object. (Optional)
Specifies a symbolic name for the interface.
(Identifier)
Specifies if the interfaces should be considered se-
curity equivalent, that means that if enabled the in-
terface group can be used as a destination interface
in rules where connections might need to be moved
between the two interfaces. (Default: No)
Specifies the interfaces that are included in the inter-
face group.
Text describing the current object. (Optional)
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the interface.
(Identifier)
125