Mitsubishi FR-F500 Instruction Manual page 65

Parameter
Name
Number
60 Intelligent mode selection
65 Retry selection
Stall prevention operation reduction
66
starting frequency
Number of retries at alarm
67
occurrence
68 Retry waiting time
69 Retry count display erasure
71 Applied motor
72 PWM frequency selection
73 0-5V/0-10V selection
74 Filter time constant
Reset selection/disconnected PU
75
detection/PU stop selection
76 Alarm code output selection
77 Parameter write disable selection
78 Reverse rotation prevention selection
79 Operation mode selection
160 User group read selection
180 RL terminal function selection
181 RM terminal function selection
182 RH terminal function selection
183 RT terminal function selection
184 AU terminal function selection
185 JOG terminal function selection
186 CS terminal function selection
190 RUN terminal function selection
191 SU terminal function selection
192 IPF terminal function selection
193 OL terminal function selection
194 FU terminal function selection
195 A, B, C terminal function selection
240 Soft-PWM setting
244 Cooling fan operation selection
900 FM terminal calibration
901 AM terminal calibration
902 Frequency setting voltage bias
903 Frequency setting voltage gain
904 Frequency setting current bias
905 Frequency setting current gain
990 Buzzer control
Used to cause the inverter to automatically set the appropriate parameters and
perform operation.
Used to select the alarm whose occurrence will cause the inverter to reset and
retry automatically.
Used to set the number of retries to be made when an alarm occurs.
Used to set the number of retries and the waiting time.
Used to set the thermal characteristic of the electronic overcurrent protection
according to the motor used.
Used to change the motor tone.
When using the voltage-input signal to perform operation, set the specifications of
the frequency setting signal input to across terminals 2-5.
Used to set the input section built-in filter constant of an external voltage or
current frequency setting signal.
Used to choose the reset selection, disconnected PU detection and PU stop
selection functions.
Used to output a 4-bit digital signal from the open collector output terminals as the
definition of an alarm that has occurred.
Used to enable or disable the write of various parameters to prevent the
parameters from being rewritten by accidental operation.
Used to prevent reverse operation trouble due to the false input of the start signal.
Use to choose the operation mode of the inverter.
Used to read the values of the basic parameters or all parameters.
Used to choose and assign the functions of the input terminals.
Used to choose and assign the functions of the output terminals.
Used to change the motor tone.
Used to control the operation of the cooling fan incorporated in the inverter.
Used to calibrate the meters connected to terminals FM-SD and AM-5.
Used to set the magnitude (slope) of the output frequency as desired relative to
the frequency setting signal (0 to 5V, 0 to 10V or 4 to 20mA DC).
Used to produce or mute the operational sound generated when you press the
keys of the operation panel and parameter unit.
53
OPERATION/CONTROL
Application