Installing Crutch And Cane Carrier - Invacare 9000 SL User Manual

2. The telescoping I.V. rod/O
3. After the cleaning solution has dried, it is safe for the user to re-occupy the wheelchair.

12.2 Installing Crutch and Cane Carrier

WARNING
Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no
interference with folding the wheelchair, the rear wheels, or the swing-back arms.
Strap MUST be securely fastened while carrying items.
NEVER insert or remove items while wheelchair is moving.
1. Slide the clamp with the base attached over the end of the step tube
of the wheelchair. Ensure the base is towards the inside of the
wheelchair.
2. Position the base parallel to the step tube.
CAUTION
Base should be parallel to step tube to avoid
bending spokes when folding the wheelchair.
3. Securely tighten the locknut that secures the base to the step tube
of the wheelchair.
4. Remove the upper back upholstery screw and washer.
5. Align the strap with the back upholstery screw mounting hole.
6. Reinstall the back upholstery screw and washer and secure the
strap to the wheelchair.
7. The base cleans easily with any chrome or glass cleaner. The strap
can be cleaned with mild soap and water.
Part No. 1056953
holders clean easily with any household glass type cleaner.
2
Strap
Base
Step
Tube
Locknut
FIGURE 2 Installing Crutch and Cane Carrier
85
12 OPTIONS
Clamp
Invacare® 9000 Series Wheelchair