Installing Wheel Lock Shoe Extensions - Invacare 9000 SL User Manual
9000 series
Hide thumbs
Also See for 9000 SL:
- Service manual (88 pages) ,
- Owner's operator and maintenance manual (76 pages) ,
- Owner's operator and maintenance manual (61 pages)
Table of Contents
Advertisement
10.3 Installing Wheel Lock Shoe Extensions
1.
Loosen the two set screws on the wheel lock shoe extension until the set screws DO NOT protrude into the slot.
2.
Insert the disk wheel lock shoe into the slot in the shoe extension.
Ensure the pointed end of the wheel lock shoe extension is facing toward the rear wheel.
3.
Position the wheel lock shoe extension so the outside edge is flush with the out side edge of the wheel lock shoe.
4.
Securely tighten the two set screws to secure the wheel lock shoe extension to the wheel lock shoes.
Part No. 1056953
Wheel Lock Shoe Extension
Pointed End of Wheel Lock
Shoe Extension
FIGURE 5 Installing Wheel Lock Shoe Extensions
10 ANTI-TIPPERS/WHEEL LOCKS
Set Screws
Slot
69
Invacare® 9000 Series Wheelchair
Advertisement
Table of Contents
Troubleshooting
