Invacare 9000 SL User Manual page 53

2. Remove the two mounting screws, spacers and locknuts that secure one back cane to the wheelchair frame (Detail "B").

It is necessary to remove only one back cane to replace the back upholstery.
3. Pull the loose back cane out of the existing back upholstery.
4. Pull the existing back upholstery up and over the mounted back cane.
5. Install the new back upholstery over the mounted back cane.
6. Slide the loose back cane through the new back upholstery.
7. Secure the back cane to the wheelchair frame with the two mounting screws, spacers and locknuts.

The spacers MUST be on the outside of the wheelchair in order to properly tighten the mounting screws.
8. Secure the new back upholstery to the back canes with the existing mounting screws and washers.
DETAIL "A"
Washer
Mounting
Screws
Part No. 1056953
Back Upholstery
Back Cane
FIGURE 8 Replacing Back Upholstery - Slip-On Back Upholstery
DETAIL "B"
Back Cane
Spacers
Mounting Screws
53
7 SEAT AND BACK
Wheelchair
Frame
Locknuts
Invacare® 9000 Series Wheelchair