Installing The Crutch And Cane Carrier; Installing The Amputee Bracket - Super Hemi Models Only - Invacare 9000 SL Owner's Operator And Maintenance Manual

OPTIONS
4. Push the seat frame down and into the H-blocks
making sure the solid folding seat brackets are
positioned in-between the H-blocks.
5. Place the other side of the solid folding seat (seat
hooks) over the opposite side crossbrace.
Solid Folding
Seat
Seat Hook
FIGURE 2 - INSTALLING THE SOLID FOLDING
SEAT
INSTALLING THE CRUTCH AND CANE
CARRIER (FIGURE 3)
Safety and Maintenance
1. Check base weekly to secure proper placement.
2. Securely fasten strap while carrying items.
3. Never insert or remove items while wheelchair
is moving.
4. Base should be parallel to step tube to avoid
bending spokes when folding the wheelchair.
Strap
Base
Step
Tube
Locknut
FIGURE 3 - INSTALLING THE CRUTCH AND
CANE CARRIER
Seat Bracket
Washer
Phillips Screw
Bottom
Clamp
5. The base cleans easily with any chrome or glass
cleaner. The strap can be cleaned with mild soap
and water.
Installing
1. Slide the clamp with the base attached over the
end of the step tube of the wheelchair.
2. Position the base parallel to the step tube.
3. Securely tighten the locknut that secures the
base to the step tube of the wheelchair.
4. Remove the upper back upholstery screw and
washer.
5. Align the strap with the back upholstery screw
mounting hole.
6. Reinstall the back upholstery screw and washer
and secure the strap to the wheelchair.
INSTALLING THE AMPUTEE BRACKET -
SUPER HEMI MODELS ONLY (FIGURE 4)
1. Remove the plug button or anti-tipper from the
step tube of the wheelchair frame.
2. Slide the amputee attachment over the step tube
of the wheelchair.
3. Secure the amputee attachment to the wheel-
chair with the hew screw, spacer and locknut.
4. Reinstall the plug button or anti-tipper onto the
step tube of the wheelchair frame.
5. Repeat STEPS 1-4 for the opposite side of the
wheelchair.
6. Reposition the rear wheels. Refer to REMOV-
ING/INSTALLING REAR WHEELS in PROCE-
DURE 4 of this manual.
Spacer
Step
Tube
Hex Screw
Amputee Attachment
FIGURE 4 - INSTALLING THE AMPUTEE
BRACKET - SUPER HEMI MODELS ONLY
39
PROCEDURE 11
Wheelchair Frame
Locknut
O
P
T
I
O
N
S