Installing Crutch And Cane Carrier - Invacare Tracer SX5 Owner's Operator And Maintenance Manual

Bracket "A"
Adult Right
Axle Spacer Toward
Outside of Wheelchair
Hemi Left

Installing Crutch and Cane Carrier

Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, ensure items are securely placed into the
base. Also ensure that there is no interference with folding the wheelchair, the rear
wheels, or the swing-back arms.
Strap must be securely fastened while carrying items.
NEVER insert or remove items while wheelchair is moving.
NOTE: For this procedure, refer to FIGURE 12.2 on page 62.
1. Slide the clamp with the base attached over the end of the step tube of the wheelchair.
Ensure the base is towards the inside of the wheelchair.
2. Position the base parallel to the step tube.
Base should be parallel to step tube to avoid bending spokes when folding the wheel-
chair.
Part No. 1110550
Left
Rear View of
Amputee Bracket
Hex Screws
FIGURE 12.1 Installing Amputee Bracket
WARNING
CAUTION
61
SECTION 12—OPTIONS
Locknuts
Right
Adult Left
Axle Spacer Toward
Outside of Wheelchair
Hemi Right
Bracket "B"
®
Tracer SX5