Raising/Lowering Elevating Legrest Assembly - Invacare 9000 SL User Manual

Button Head
Screw
Adjustment
Hole
Cam Lock
Inside of
Lever
Swingaway
Front Rigging
5.3

Raising/Lowering Elevating Legrest Assembly

WARNING
Ensure hands and fingers are clear of elevating
legrest mechanism before pushing release lever to
lower the elevating legrest. Otherwise injury may
occur due to pinch points.
The wheelchair user's leg MUST be supported by
an assistant before attempting to lower legrest.
1. To raise the elevating legrest, the assistant should hold the support
tube and raise the elevating legrest until the desired height is
obtained.
2. To lower the elevating legrest, perform the following:
A. Support user leg with one hand.
B. Push release lever downward with other hand.
Part No. 1056953
Front Rigging Support
Threaded Rivet
Button Head
Footplate
Assembly
Outside of Swingaway
Front Rigging
FIGURE 3 Bolt-In-Place Height
C.
FIGURE 4 Raising/Lowering Elevating Legrest Assembly
43
Front Rigging
Support
Screw
Adjustment Hole

Swingaway footrest shown.
Gently, lower user leg down and rest against the legrest.
Invacare® 9000 Series Wheelchair
5 FRONT RIGGINGS
Threaded
Rivet
Footplate
Assembly
Release Lever
Support Tube