CAUTION
As with any vehicle, check the wheels and tires periodically for cracks and wear. Replace if damaged.
❑
If equipped, check that quick-release axles lock properly. Lubricate if necessary.
❑
Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑
Ensure all spokes are uniformly tight.
❑
Inspect handrims for signs of rough edges or peeling.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑
Ensure wheel bearings are clean and free of moisture.
❑
Check headtube locknuts for tightness.
❑
Inspect casters for cracks and wear.
❑
Inspect front casters for cracked, bent or broken spokes.
❑
Clean upholstery and armrests.
Inspect/Adjust Weekly
❑
Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑
Inspect tires for flat spots and wear.
❑
Check pneumatic tires for proper inflation.
❑
If equipped, check that quick-release axles lock properly. Lubricate if necessary.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑
Ensure all spokes are uniformly tight.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑
Inspect front caster for cracked, bent or broken spokes.
Part No. 1056953
4 SAFETY INSPECTION/TROUBLESHOOTING
33
Invacare® 9000 Series Wheelchair