Invacare 9000 SL User Manual page 71

WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
LIft kit models only - DO NOT attempt to recline or incline the wheelchair back without occupant. Back will raise abruptly
and cause injury. Keep clear when reclining or inclining (reverse recline) chair back to avoid injury.
ALWAYS engage both wheel locks while reclining or inclining (reverse recline) the wheelchair.
Make sure the patient is properly positioned in the wheelchair before reclining or inclining (reverse recline) to maintain
maximum stability and safety. Refer to on page 31.
1. Unfold wheelchair. Refer to on page 31.
2. Attach spreader bar. Refer to Storing/Replacing Spreader Bar on page 75.
3. Adjust the tightness of the headrest/back upholstery. Refer to Adjusting Headrest/Back Upholstery Tension on page 74.
4. Make sure wheelchair is occupied and on a level surface before reclining.
5. Engage the wheel locks. Refer to Using/Adjusting Wheel Locks on page 78.
6. Inform the occupant of the wheelchair that the wheelchair is about to be reclined.
7. Make sure occupant's hands and body are clear of all pinch points.
8. Stand behind the wheelchair and grasp both push handles firmly.
9. Squeeze release handles.
10. Slowly pull back on the back assembly while squeezing the release handles.
11. When the back reaches the desired angle, slowly let go of the release handles.
12. To return the back to the full upright position, reverse STEPS 8-11 keeping in mind proper body mechanics.
Part No. 1056953
71
11 RECLINER
Invacare® 9000 Series Wheelchair