Replacing Desk/Full Length Armrest Pad (Fixed Height Arms Only); Replacing Clothing Guards (Fixed Height Arms Only); Converting Between Space Saver And Conventional Arms - Invacare 9000 SL User Manual

6.4 Replacing Desk/Full Length Armrest Pad (Fixed
Height Arms Only)
1. Remove the mounting screws that secure the armrest pad to the
armrest assembly.
2. Replace armrest pad and securely tighten with the existing
mounting screws.
6.5 Replacing Clothing Guards (Fixed Height Arms
Only)
1. Remove the four mounting screws that secure the existing clothing
guard to the armrest assembly.
2. Install new clothing guard and securely tighten with the existing
mounting screws.
6.6

Converting Between Space Saver and Conventional Arms


Space Saver arms DO NOT work with 9000XT/9000SL with the adjustable angle back option and 9000XT Recliner.
1. Remove the arms from the wheelchair. Refer to Removing or Replacing Armrest on page 48.
2. Remove the locknut and hex screw that secure the arm socket to the wheelchair frame.
3. Repeat STEP 2 for the opposite side of the wheelchair.
4. Reposition the arm socket to one of two positions:
A. For conventional arms - position arm socket on outside of frame.
B. For space saver arms - position arm socket on inside of frame.

Make sure arm sockets sit flush against the wheelchair frame.
5. Reinstall the hex screw and locknut that secure the arm socket to the wheelchair frame and securely tighten.
Part No. 1056953
Mounting Screws
Clothing
Guard
Mounting Screws
FIGURE 4 Replacing Desk/Full Length Armrest Pad (Fixed
49
Armrest Pad
Mounting Screws
Height Arms Only)
Invacare® 9000 Series Wheelchair
6 ARMS
Armrest
Assembly