Invacare 9000 SL User Manual page 14

2 OVERVIEW
 * These options are standard for this model.
** 9000 SL - The seat-to-floor heights are based on urethane tires. If wheelchair is equipped with pneumatic (properly
inflated) or solid rubber tires, add ¼-inch to the measurements listed above. These heights can vary +/- ¼-inch due to tire
wear and manufacturing tolerances.
** 9000 XT - The seat-to-floor heights are based on urethane tires. If wheelchair is equipped with pneumatic (properly
inflated) or solid rubber tires, add ¼-inch to the measurements listed above. These heights can vary +/- ¼-inch due to tire
wear and manufacturing tolerances.
** 9000 XT Recliner - The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If
wheelchair is equipped with urethane tires, subtract ¼-inch from the measurements listed above. All heights are measured
with properly inflated new tires. These heights can vary + ¼-inch due to tire wear.
** 9000 XDT - The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If
wheelchair is equipped with urethane tires, subtract ¼-inch from the measurements listed above. All heights are measured
with properly inflated new tires. These heights can vary + ¼-inch due to tire wear.
Invacare® 9000 Series Wheelchair
14
Part No. 1056953