Invacare 9000 SL User Manual page 31

Folding Hammock or Sling Seat Models
1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar
from the side frame. Refer to Storing/Replacing Spreader Bar on
page 75.
2. Swing footrest/legrest in locked position to the front of the
wheelchair.
3. Pivot footplates upward to vertical position.
4. With both hands, grasp the middle of the seat upholstery at the
front and back edge and lift up.
5. Continue to close the wheelchair by grasping the armrest furthest
from you and pulling the armrest towards you.
Folding Solid-Seat Models
1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar
from the side frame. Refer to Storing/Replacing Spreader Bar on
page 75.
2. Swing footrest/legrest in locked position to the front of the
wheelchair.
3. Pivot footplates upward to vertical position.
4. From behind the wheelchair, grasp the right hand edge of the solid
seat.
5. Raise the seat to the hinged side.
6. With both hands, grasp the middle of the front and back edges of
the solid folding seat and lift up until the wheelchair begins to close.
7. Continue to close the wheelchair by grasping the armrest furthest
from you and pulling the armrest towards you.
Part No. 1056953
FIGURE 7 Folding Hammock or Sling Seat Models
FIGURE 8 Folding Solid-Seat Models
31
3 SAFETY
Invacare® 9000 Series Wheelchair