Installing Crutch And Cane Carrier - Invacare Tracer SX5 User Manual

13 OPTIONS

13.2 Installing Crutch and Cane Carrier

WARNING
Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no
interference with folding the wheelchair, the rear wheels, or the swing-back arms.
Strap MUST be securely fastened while carrying items.
NEVER insert or remove items while wheelchair is moving.

For ths procedure, refer to FIGURE 2.
1. Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair.
2. Position the base parallel to the step tube.
CAUTION
Base should be parallel to step tube to avoid
bending spokes when folding the wheelchair.
3. Securely tighten the locknut that secures the base to the step tube
of the wheelchair.
4. Remove the upper back upholstery screw and washer.
5. Align the strap with the back upholstery screw mounting hole.
6. Reinstall the back upholstery screw and washer and secure the
strap to the wheelchair.
7. The base cleans easily with any chrome or glass cleaner. The strap
can be cleaned with mild soap and water.
® ®
Invacare Tracer SX5 Wheelchair
Strap
Base
Step
Tube
Locknut
FIGURE 2
76
Clamp
Installing Crutch and Cane Carrier
Part No. 1110550