11.5 Storing/Replacing Spreader Bar
Storing Spreader Bar
The 9000XT Recliner is folded for either storage
or transporting. One side of the spreader bar
MUST be removed and placed in a vertical position
alongside the recliner tube.
Removing From Stored Position
1.
Rotate the end of the spreader bar 90
frame.
2.
Install threaded end of locking knob into locknut located on the
opposite side frame. Securely tighten both knobs.
Placing In Stored Position
1.
Remove one locking knob from the spreader bar.
2.
Loosen the remaining locking knob on the spreader bar.
3.
Rotate detached end of the spreader bar 90° down toward floor.
Replacing Spreader Bar
1.
Remove both locking knobs that secure the spreader bar to the side
frames.
2.
Remove existing spreader bar.
3.
Secure new spreader bar to the side frames with the existing
locking knobs. Securely tighten.
Part No. 1056953
toward the opposite side
o
Locking
Knob
Spreader
Bar
Recliner
Tube
Locking Knob
FIGURE 5 Storing/Replacing Spreader Bar
Locking
Knobs
Side Frame
FIGURE 6 Replacing Spreader Bar
75
11 RECLINER
Side Frame
Threaded
End
Spreader Bar
Side Frame
Invacare® 9000 Series Wheelchair