Interface S-Channel; Reset Counters Interface S-Channel - HP 6125XLG Command Reference Manual

interface s-channel

Use interface s-channel to enter S-channel interface view or VSI view.
Syntax
interface s-channel { interface-number:channel-id | interface-number:channel-id.vsi-local-id }
Views
System view
Predefined user roles
network-admin
Parameters
interface-number:channel-id: Specifies an S-channel interface. The interface-number argument specifies
the physical port where the S-channel resides. The channel-id argument specifies the ID of the S-channel.
This S-channel ID must exist.
interface-number:channel-id.vsi-local-id: Specifies a VSI. The interface-number argument specifies the
physical port where the S-channel resides. The channel-id argument specifies the ID of the S-channel. This
S-channel ID must exist. The vsi-local-id argument specifies the local ID of the VSI. This VSI local ID must
exist.
Examples
# Enter the view of S-channel interface S-channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname–S-Channel1/0/1:10]
# Enter the view of VSI S-channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1]

reset counters interface s-channel

Use reset counters interface s-channel to clear statistics for an S-channel interface or a VSI.
Syntax
reset counters
interface-number:channel-id.vsi-local-id ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-number:channel-id: Specifies an S-channel interface. The interface-number argument specifies
an S-channel by its port. The channel-id argument specifies the number of an S-channel. This S-channel
ID must exist.
interface [ s-channel
19
[ interface-number:channel-id |