Normal Yaw Damper Direction; Reversed Yaw Damper Direction - Garmin G3X Installation Manual

11. Go to the AP page in configuration mode and navigate to the Yaw Servo sub-section to configure
the servo direction.
a) The Servo Direction should be set to Normal. The servo arm should move clockwise to
cause a nose left rudder movement and servo arm should move counterclockwise to cause a
nose right rudder movement.
NOSE RIGHT
b) The Servo Direction should be set to Reverse. The servo arm should move clockwise to
cause a nose right rudder movement and the servo arm should move counterclockwise to
cause a nose left rudder movement.
NOSE LEFT
G3X Installation Manual - GSA 28 Installation
Page 9-46
NOSE LEFT
Figure 9-17 Normal Yaw Damper Direction
NOSE RIGHT
Figure 9-18 Reversed Yaw Damper Direction
190-01115-01
Rev. L