10.1.1 Status LED
The GSU 25 has an LED on its outer case that indicates its current status. The status indications are:
LED Indication
No Light
Steady Green
Flashing Green
Red
Alternating Red/Green
10.2 General Specifications
See
Section 2.2
for power/current specifications, and
10.3 Required Equipment
Table 10-2 lists the kits available for the GSU 25.
GSU 25 Unit Assembly
GSU 25 Connector Kit (contains all items in Table 10-3
and Table 10-4)
Table 10-3 Contents of 9 Pin Connector Kit (011-03002-00)
Backshell w/Hdw, Jackscrew, 9/15 pin
CAN Termination Kit
D-Sub, Crimp Socket Connector, 09 CKT
Contact Socket, Mil Crimp, Size 20, 20-24 AWG
Table 10-4 Contents of 15 Pin Connector Kit (011-03002-01) contains mounting hardware
Backshell w/Hdw, Jackscrew, 15/26 pin
AN3-7A, Bolt
AN960, Cad Plate, #10 Washer
D-Sub, Crimp Socket Connector, 15 CKT
Contact Socket, Mil Crimp, Size 20, 20-24 AWG
G3X Installation Manual - GSU 25 Installation
Page 10-2
Table 10-1 Status LED Indications
Table 10-2 GSU 25 Available Equipment
Item
Item
Item
Status
No Power
On, but not communicating via CAN Bus
On and communicating via CAN Bus
Hardware Fault
CAN bus network error two similar devices are
configured with the same unit ID
Section 2.4.1
for dimension/weight specifications.
Garmin P/N
011-02929-00
K10-00181-00
Garmin P/N
011-01855-00
011-02887-00
330-00625-09
336-00022-02
Garmin P/N
011-01855-01
211-00090-05
212-00035-10
330-00652-15
336-00022-02
Quantity
1
1
Quantity
1
1
1
9
Quantity
1
4
4
1
15
190-01115-01
Rev. L