Minimum Visible Aoa Calibration - Garmin G3X Installation Manual

19.4.1.1 Minimum Visible AOA Calibration

This procedure sets the AOA value for the bottom of the AOA gauge green arc (Figure 19-6), which is also
the AOA value at which the gauge will first appear on the PFD. Perform this calibration while flying the
aircraft at an AOA somewhat higher than a normal cruise flight (1.5 x stall speed is suggested) to avoid
nuisance frequent appearances of the AOA gauge.
1. Use the FMS Joystick to select the Calibrated Minimum Visible AOA calibration field, then press
the Calibrate softkey .
2. Follow the onscreen instructions, then press the Start softkey to begin the calibration.
190-01115-01 G3X Installation Manual - Post Installation Checkout and Calibration Procedures
Rev. L
Figure 19-6 Minimum Visible AOA
Minimum
Visible AOA
Page 19-29