Can Bus - Garmin G3X Installation Manual

15.1.5 CAN Bus

The CAN Bus conforms to the BOSCH standard for Controller Area Network 2.0-B, and complies with
ISO 11898. Pins 9 and 21 are used to terminate the CAN bus. To terminate the CAN bus at the GAD 29
short the pins (9 and 21) together. Refer to
CAN bus. The CAN bus on J241 shall be used for communications between G3X LRUs.
CAN HI
CAN LO
CAN TERM 1
CAN TERM 2
G3X Installation Manual - LRU Pinouts
Page 15-4
Section 2.3.1.3
Pin Name
for details on configuring and terminating the
Connector
J291
J291
J292
J292
Pin I/O
1 I/O
2 I/O
9 --
21 --
190-01115-01
Rev. L