Garmin G3X Installation Manual page 195

Table 14-1 Compatible Engine/Airframe Input Sensors
SENSOR TYPE
Discrete Inputs
Carburetor Temperature
Position Sensor
Auxiliary Temperature
*Items with a Garmin part number may be included in a G3X Sensor Kit
individually from Garmin Dealers
**Two sensors required for differential fuel flow
***UMA temperature sensors without the "R" designation are not compatible with the G3X system
The Engine inputs being monitored are displayed as gauges on the EIS display (Figure 14-1) and also on
the MFD's Engine Page.
The following list of gauges, (if configured) are specifically required by FAR 91.205 and will always be
displayed on the EIS display (engine bar). Other gauges will be displayed as space permits based on a pre-
defined priority and user selections.
RPM
Coolant Temperature
190-01115-01
Rev. L
COMPATIBLE SENSORS
Active High or Low: Canopy
Warning, Gear Down Reminder,
etc.
UMA 1B10R***
Rotax 965531
Rotax 966385
Trim servo with integrated
position sensor or standalone
slide potentiometer (0-5 K Ω
variable resistor)
RTD (e.g. UMA 1B3XR series)
50-150C Thermistor
(e.g. VDO 320-XXX series)
Figure 14-1 EIS Display (Engine Bar)
Oil Temperature
Fuel Quantity
G3X Installation Manual - Engine/Airframe Sensor Installation
GARMIN PART NUMBER*
N/A
494-70005-00
N/A
N/A
N/A
N/A
N/A
(Section 14.2), and are available
Oil Pressure
Page 14-3