1.5 Optional Garmin Equipment (non-LRU)
1.5.1
Optional GMU 22 Mounting Racks
The Universal Mounting Rack is an optional mounting rack for the GMU 22, refer to the AHRS
Magnetometer Installation Considerations (190-01051-00) document available from www.garmin.com.
Refer to
Appendix A
for airframe specific GMU 22 mounting racks and related mounting hardware.
1.5.2
Antenna Brackets/Doubler Plates
See
Section 13
for detailed information.
1.5.3
Silicon Fusion Tape
Garmin Part Number 249-00114-00 or similar, used to wrap the wiring/cable bundles.
1.6 Optional non-Garmin Equipment
1.6.1
Engine/Airframe Sensors
See
Section 14.1
for a list of compatible sensors, and
1.6.2
Mounting Hardware
Some sensors may require a torque screwdriver, copper crush gasket, #10 screws, or #8 ring terminals for
installation.
1.7 Optional 3rd Party Sensors/LRUs
Refer to
Appendix
E,
Appendix
supported third party equipment.
1.8 Garmin Software and Documents
The below are available for free download from www.garmin.com.
•
AHRS Magnetometer Installation Considerations
•
Aviation Checklist Editor (ACE) software
•
Flightlog Conversion Software
•
GDU 37X Cockpit Display Unit Software
•
GMU 22 Location Survey Tool
•
GSU 73 Data Logger Software
•
GSU 73 Field Calibration Tool
•
Panel Cut-out DXF File
190-01115-01
Rev. L
Section 14.3
F,
Appendix
G, and
Appendix H
G3X Installation Manual - Inventory of Materials
for a list of available sensor kits.
for wiring/configuration guidance of
Page 1-9