2.3.1.4 Cable Connector Installation
Coaxial cables are required for antenna connections for GPS, XM, transponder, comm, VHF Nav, and
ADS-B functions.
1. Route the coaxial cable to the unit location. Secure the cable in accordance with good aviation
practices.
2. Trim the coaxial cable to the desired length and install the BNC or TNC (per Figure 2-7)
connector. If provided, follow the connector manufacturer's instructions for cable preparation.
2.4 Mechanical Considerations
This section presents all information required for planning the physical layout of the G3X installation.
G3X Installation Manual - Installation Preparation
Page 2-8
Figure 2-7. TNC Connector Installation
190-01115-01
Rev. L